Trouble codes › P0365
P0365 Camshaft Position Sensor "B" Circuit (Bank 1)
Engine timing
P0365 means the engine computer isn't getting a usable signal from bank 1's camshaft position sensor B (usually the exhaust cam).
The engine computer isn't getting a usable signal from camshaft position sensor B on bank 1, usually the exhaust camshaft sensor.
Usually drivable, but the engine may run poorly or turn off variable valve timing. Get it fixed soon.
Common causes
- A failed camshaft position sensor
- Damaged wiring or an oil-soaked connector
- A timing chain problem (less common)
Symptoms
- Check-engine light
- Rough idle, hard starting
- Reduced power
What to check first
- Inspect the sensor's connector and wiring.
- Check the sensor's power, ground and signal.
- Replace the sensor if the wiring checks out.
What does P0365 mean on your vehicle?
The likely cause depends on your engine. iRepair researches your exact year, make, model and engine (service bulletins, recalls and owner reports) and tells you what to check first. Your first 3 questions are free.
Ask iRepair about P0365No scanner? Most auto parts stores read check-engine codes for free.
Related codes
General guidance for P0365 on most vehicles. Some makers use the same code a little differently; confirm in the service information for your vehicle, put safety first, and see a professional when in doubt.