Trouble codes › P0010
P0010 "A" Camshaft Position Actuator Circuit (Bank 1)
Engine timing
P0010 means there's an electrical fault in bank 1's intake cam variable valve timing solenoid circuit.
The engine computer found an electrical fault in the variable valve timing (oil control) solenoid circuit for bank 1's camshaft A, usually the intake cam.
Usually drivable, but expect rough idle or reduced power. Get it fixed soon.
Common causes
- A failed variable valve timing solenoid
- An unplugged or oil-soaked connector
- Damaged wiring
- A blown fuse feeding the solenoid (on some vehicles)
Symptoms
- Check-engine light
- Rough idle or stalling
- Reduced power, worse fuel economy
What to check first
- Check the solenoid's connector and wiring for oil or damage.
- Measure the solenoid's resistance against spec.
- If your scan tool can, command the solenoid on and off and listen for a click.
- Replace the solenoid if it's open or shorted.
What does P0010 mean on your vehicle?
The likely cause depends on your engine. iRepair researches your exact year, make, model and engine (service bulletins, recalls and owner reports) and tells you what to check first. Your first 3 questions are free.
Ask iRepair about P0010No scanner? Most auto parts stores read check-engine codes for free.
Related codes
General guidance for P0010 on most vehicles. Some makers use the same code a little differently; confirm in the service information for your vehicle, put safety first, and see a professional when in doubt.